PRO IS2 is a passive two-input and two-output isolated signal splitter without the need to install batteries or provide phantom power.
 
PRO IS2 has a pair of built-in UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer with special coating and surrounded by Oriental silicon steel shield which has a special copper foil layer and a dedicated ground layer, which allows this device to restore high signal/noise ratio and dynamic sound, and can avoid unnecessary Leakage caused by radio frequency interference, ground interference and potential difference. PRO IS2 is particularly suitable for recording studios, live performances and fixed installation projects.
 
PRO IS2’s input uses combi sockets, suitable for both balance XLR and TRS plugs. The CH-1/CH-2 output channels each have an independent UNiKAPROTM isolation transformer and independent GND/LIFT switch for easy connection to remote or different power sources at the end of the equipment to eliminate the leakage and noise caused by the potential difference and the ground loop.
 
Key Features

• Two inputs, two output passive isolator.

• CH-1/CH-2 are equipped with separate UNiKA-PROTM EI9AE3R3 1.25:1 isolation transformer

• XLR/Jack combination sockets for inputs

• Set the PHASE REVERSE button for CH-2 input

• The output is equipped with independent GND/LIFT switches