• 180 W RMS, max SPL of 114 dB at 1 m
  • 80 - 20,000 Hz frequency range
  • Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs
  • Internal DSP with 4 modes
  • Seamless integration of NRG series subwoofer

The DAP NRG-8A is an active full-range loudspeaker with a peak power of 360 watts (180 watts continuous RMS). It uses an 8” woofer and a 1” compression driver, and has an internal DSP with 4 useful modes: Contour, Flat, Speech and +Sub, which apply a loudness curve, a flat curve, a high-pass curve or a high-pass with optimised frequency and phase curve specifically for the NRG subwoofer range respectively. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The internal class D amplifier has a switched-mode power supply to keep the weight down and efficiency level up. The internal DSP includes a crossover for the woofer and compression driver, a 2-band limiter, a short circuit protection and thermal protection.

As well as dedicated XLR combo jacks for microphone and line-level signals, the NRG-8A has an integrated Bluetooth 5.0 receiver for playing music from your mobile phone, laptop, or other Bluetooth media player. The Bluetooth receiver features True Wireless Stereo (TWS) and can be configured to enjoy stereo sound when using a pair of NRG full-range speakers. The line output is looped through and there is an additional ‘Mix out’ output with all signals available for driving a second unit or a subwoofer, preferably from the NRG range. Separate gain controls make it easy to adjust the level of the different input signals and a master control sets the overall volume.

The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. To get the most out of the NRG-8A, we recommend adding an NRG series subwoofer.


Specifications

Outputs

Power Amplifier RMS Output     180 W

Power Amplifier Peak Output    360 W

Main Outputs     1

Main Output Connector    3-pin XLR


Inputs

Mono Inputs    2

Mono Input Connector     3-pin XLR


Audio Specifications

THD Level    < 0.3 %

Signal-to-noise Ratio     > 95 dB

AD/DA Convertor Sample Rate      48 kHz

Audio Latency     1.2 ms

Amp Technology      Class D

Speaker System     2-way

Speaker Sensitivity (1 W/1 m)     93 dB

Maximum SPL at 1 m       114 dB

Frequency Response (-6 dB) Minimum      80 Hz

Frequency Response (-6 dB) Maximum       20000 Hz

Woofer Diameter     8 "

Woofer Voice Coil Diameter      1.5 "

Woofer Magnet Type      Ferrite

Compression Driver Diameter      1 "

Compression Driver Voice Coil     1.4 "

Compression Driver Magnet Type      Ferrite

Dispersion Angle (Horizontal)      90 °

Dispersion Angle (Vertical)     60 °


Internal Storage

User Presets     Yes

User Presets Capacity     4


Electrical Specifications and Connections

Power Supply      100-240 V AC 50/60 Hz

SMPS     Yes

Power Consumption     120 W

Power Connector In     Power Pro Blue


Mechanical Specifications

Height (mm)     475 mm (18.701″)

Width (mm)     275 mm (10.827″)

Depth (mm)      280 mm (11.024″)

Material     Plywood

Colour     Black

Weight    10.9 kg (24.03 lb)

IP Rating     IP20 (indoor use only)


Product Properties

LED Indicators     BT Pairing, DSP Mode, Limit, Power, Protect, Signal

Speaker Handle Positions     Left side, Right side


Rigging

Rigging Eye Thread    M10


Thermal Specifications

Maximum Ambient Temperature     40 °C (104 °F)

Maximum Surface Temperature    50 °C (122 °F)


Included Items

Included Cables     Power Pro Cable

Write a review

Note: HTML is not translated!
    Bad           Good

DAP NRG-8A

  • Brand: DAP Audio
  • Product Code: D3653
  • Availability: 5-7 Days
  • £430.00

  • Ex Tax: £358.33

Related Products

Showtec Mammoth Speaker Stand 1300-1900mm / 35mm - max load: 40kg

Showtec Mammoth Speaker Stand 1300-1900mm / 35mm - max load: 40kg

Lightweight aluminiumMagnesium jointDouble leg reinforcementProduced in Europe, these extremely robu..

£65.00 Ex Tax: £54.17

Showtec Mammoth Distance Tube 90-128cm / 35mm - max load 50kg

Showtec Mammoth Distance Tube 90-128cm / 35mm - max load 50kg

Supports up to 50 kgRobust designAdjustable heightManufactured in EuropeThe Showgear Mammoth Distanc..

£20.00 Ex Tax: £16.67

Showtec Mammoth Distance Tube 90-128cm - max load 50kg - M20

Showtec Mammoth Distance Tube 90-128cm - max load 50kg - M20

Supports up to 50 kgRobust designAdjustable heightManufactured in EuropeThe Showgear Mammoth Distanc..

£22.00 Ex Tax: £18.33

Showtec Mammoth Adjustable Speaker Bracket 35mm Max load 30kg

Showtec Mammoth Adjustable Speaker Bracket 35mm Max load 30kg

Produced in Europe, these extremely robust stands have been designed for being on the road. Stable, ..

£27.00 Ex Tax: £22.50

DAP Transport Cover for NRG-8(A)

DAP Transport Cover for NRG-8(A)

For DAP NRG-8 and NRG-8ADurable, water-repellent Codura fabricCut-outs for handlesThe Transport Cove..

£76.50 Ex Tax: £63.75