• 180 W RMS, max SPL of 115 dB at 1 m

• 70 - 20,000 Hz frequency range

• Bluetooth 5.0 with True Wireless Stereo (TWS) Dedicated mic and line inputs

• Internal DSP with 4 modes

• Seamless integration of NRG series subwoofer

The DAP NRG-10A is an active full-range loudspeaker with a peak power of 360 watts (180 watts continuous RMS). It uses a 10” woofer and a 1” compression driver, and has an internal DSP with 4 useful modes: Contour, Flat, Speech and +Sub, which apply a loudness curve, a flat curve, a high-pass curve or a high-pass with optimised frequency and phase curve specifically for the NRG subwoofer range respectively. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The internal class D amplifier has a switched-mode power supply to keep the weight down and efficiency level up. The internal DSP includes a crossover for the woofer and compression driver, a 2-band limiter, a short circuit protection and thermal protection.

As well as dedicated XLR combo jacks for microphone and line-level signals, the NRG-10A has an integrated Bluetooth 5.0 receiver for playing music from your mobile phone, laptop, or other Bluetooth media player. The Bluetooth receiver features True Wireless Stereo (TWS) and can be configured to enjoy stereo sound when using a pair of NRG full-range speakers. The line output is looped through and there is an additional ‘Mix out’ output with all signals available for driving a second unit or a subwoofer, preferably from the NRG range. Separate gain controls make it easy to adjust the level of the different input signals and a master control sets the overall volume.

The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. To get the most out of the NRG-10A, we recommend adding an NRG series subwoofer.

Specifications

Outputs

Power Amplifier RMS Output      180 W

Power Amplifier Peak Output      360 W

Main Outputs     1

Main Output Connector    3-pin XLR

Inputs

Mono Inputs    2

Mono Input Connector     3-pin XLR

Audio Specifications

THD Level     < 0.3 %

Signal-to-noise Ratio      > 95 dB

AD/DA Convertor Sample Rate     48 kHz

Audio Latency     1.2 ms

Amp Technology     Class D

Speaker System      2-way

Speaker Sensitivity (1 W/1 m)     94 dB

Maximum SPL at 1 m       115 dB

Frequency Response (-6 dB) Minimum      70 Hz

Frequency Response (-6 dB) Maximum     20000 Hz

Woofer Diameter     10 "

Woofer Voice Coil Diameter      2 "

Woofer Magnet Type     Ferrite

Compression Driver Diameter      1 "

Compression Driver Voice Coil      1.4 "

Compression Driver Magnet Type      Ferrite

Dispersion Angle (Horizontal)     90 °

Dispersion Angle (Vertical)     60 °

Internal Storage

User Presets      Yes

User Presets Capacity    4

Electrical Specifications and Connections

Power Supply     100-240 V AC 50/60 Hz

SMPS     Yes

Power Consumption      150 W

Power Connector In     Power Pro Blue

Mechanical Specifications

Height (mm)     550 mm (21.654″)

Width (mm)      325 mm (12.795″)

Depth (mm)      320 mm (12.598″)

Material     Plywood

Colour     Black

Weight     12.5 kg (27.558 lb)

IP Rating     IP20 (indoor use only)

Product Properties

LED Indicators      BT Pairing, DSP Mode, Limit, Power, Protect, Signal

Speaker Handle Positions      Left side, Right side

Rigging

Rigging Eye Thread     M10

Thermal Specifications

Maximum Ambient Temperature     40 °C (104 °F)

Maximum Surface Temperature     50 °C (122 °F)

Included Items

Included Cables      Power Pro Cable