• 800 W RMS / 128 dB SPL at 1 m

• 12" Ferrite Celestion low driver

• 1,75" Ferrite Celestion compression driver

• Class D amplifier with integrated DSP processor

• Usable as stage monitor, full-range speaker & top speaker

The DAP Odin SF-12A is a versatile 12" full-range active bi-amped speaker. Its Celestion Ferrite drivers provide a well balanced sound suitable for both on and off stage. Due to its sturdy, road-ready and extra angular design, it can be used as stage monitor, full-range speaker as well as top speaker. A combination is possible with a DAP Odin S-18 or S-18A Subwoofer. The low driver has a water resistant coating to survive humid and outdoor conditions.

The SF-12A is equipped with an 800 watt RMS Class D amplifier. It can produce a staggering 128 dB SPL at 1 meter distance. This makes it more than competent for either in-fill, out-fill and drum-fill applications as well as delay speaker. It also has an integrated DSP processor that is similar to other active Odin speakers and can be used with the same editor software.

The SF series includes all mounting/rigging options, both for flying (built-in M10 thread) and in combination with a speaker stand or distance pole. The rotatable horn enables the speaker to be placed both in horizontal and vertical position.

Specifications

Outputs

Low Driver Power     350 W

High Driver Power     130 W

Power Amplifier RMS Output    800 W

Power Amplifier Peak Output    3200 W

Main Outputs    1

Main Output Connector    3-pin XLR

Inputs

Mono Inputs    1

Mono Input Connector     3-pin XLR

Audio Specifications

THD Level    < 0.5 %

Signal-to-noise Ratio     > 90 dB

AD/DA Convertor Sample Rate    48 kHz

Amp Technology    Class D

Damping Factor    200 :1

Speaker System    2-way

Speaker Sensitivity (1 W/1 m)    96 dB

Maximum SPL at 1 m     128 dB

DSP Processor Bitrate     32-bit

Frequency Response (-3 dB) Minimum     60 Hz

Frequency Response (-3 dB) Maximum     19000 Hz

Crossover Frequency (High)     1600 Hz

Woofer Diameter     12 "

Woofer Voice Coil Diameter     3 "

Woofer Magnet Type     Ferrite

Compression Driver Diameter    1 "

Compression Driver Voice Coil     1.75 "

Compression Driver Magnet Type     Ferrite

Dispersion Angle (Horizontal)      80 °

Dispersion Angle (Vertical)    60 °

Sound Editing

Equalizer Gain Range     30 dB

Parametric Output Equalizer     8 Bands

Phase Reverse    Yes

Internal Storage

User Presets    Yes

User Presets Capacity     10

Control and Programming

Control Mode     PC Software, Stand Alone

Electrical Specifications and Connections

Power Supply    100-240 V AC 50/60 Hz

Power Consumption     300 W

Fuse     6.3 A

Power Connector In    powerCON Blue

Power Connector Out     powerCON Grey

Data Connector In    etherCON

Data Connector Out     etherCON

Mechanical Specifications

Amplifier Cooling    Axial fan

Height (mm)    646 mm (25.433″)

Width (mm)     396 mm (15.591″)

Depth (mm)     379 mm (14.921″)

Material     Plywood

Material Thickness     15 mm (0.591″)

Colour     Black

Finish      Painted

Weight    23.7 kg (52.249 lb)

IP Rating     IP20 (indoor use only)

Product Properties

Pole Mount    35 mm

Electronic Protection     Convection-fan, Digital limiter, Overload, Thermal

LED Indicators     Clip, Data connect, Power, Protect, Signal

Rotatable Horn     Yes

Useable as Monitor/Wedge    Yes

Speaker Grille Material     Steel

Speaker Handle Positions     Left side, Right side

Rigging

Mounting Options     Eye bolt

Mounting Orientations     Horizontal, Vertical

Rigging Options     Flying

Rigging Eye Thread     M10

Thermal Specifications

Maximum Ambient Temperature    40 °C (104 °F)

Included Items

Included Cables     None

Included Accessories    None

Included Rigging    None