• Converts active speakers into Bluetooth speakers

• Configurable mono/stereo output (L/R when used in pairs)

• BT 5.0 with aptX, AAC, and SBC support

• >8-hour battery life, chargeable via micro-USB (5 V / 1 A)

• Stereo 3.5 mm jack and mono XLR output

The DAP COM-BTX BT 5.0 Audio Receiver is a wireless, high-quality receiver that can be plugged into an XLR input directly, turning an active loudspeaker into a Bluetooth speaker or adding Bluetooth reception to a mixing desk. Thanks to its modern BT 5.0 standard, it is compatible with many current mobile devices and laptops and offers an excellent range of over 40 m (130 ft) (free line of sight). Through the support of the aptX, AAC, and SBC codecs, the receiver is capable of offering a high level of sound quality. It offers a mono audio signal output via its male XLR plug, but also has a stereo output via a 3.5 mm TRS jack socket. When a pair of COM-BTX receivers is used, this mono output is configured to pass the left or right audio signal (instead of a monaural, combined signal from both channels). This is especially handy when two (active) loudspeakers are set up as a stereo pair.

The unit has a rechargeable, internal Li-ion battery and can play without an external power supply for at least 8 hours at an average signal level. Powering/charging can be done with a standard 5 V USB charger via a micro-USB socket. A USB A to micro-USB charging cable is included (a 5 V power supply is not included).

Specifications

Wireless Specifications

Wireless Audio Frequency Start             2402 MHz

Wireless Audio Frequency End            2480 MHz

RF Bandwidth              2400 MHz

Audio Specifications

THD Level                < 0.1%

Signal-to-noise Ratio               > 75 dB

Frequency Response Minimum              20 Hz

Frequency Response Maximum                 20000 Hz

Battery

Battery Type             Lithium ion

Battery Voltage            3.7 V

Capacity                 0.3 Ah

Runtime @Full                 8 h

Charging Time                    5 h

Product Properties

LED Indicators                 Battery status, BT Pairing, Operation mode

Electrical Specifications and Connections

Power Supply              5 V DC

Power Connector In                Micro USB

Mechanical Specifications

Height (mm)                  26 mm (1.024″)

Width (mm)                  27 mm (1.063″)

Length (mm)              111 mm (4.37″)

Housing               Plastic

Weight              0.052 kg (0.115 lb)

Colour               Black

Thermal Specifications

Maximum Ambient Temperature            40 °C (104 °F)

Included Items

Included Cables             USB-A - Micro USB cable