• Channel displays that show the input source

• 2 built-in USB-Audio interfaces

• VCA controlLED faders

• Reverb & talk-over on microphone channels

• Individual in- and output VU’s

The DAP IMIX-7.2 USB is a unique installation mixer. It’s a 6U, 7 Channel, 2 Zone mixer with 2 built-in USB-Audio interfaces especially designed to fulfill all audio needs of a pub, school, small disco without scarifying on the ease of use. It is the world first installation mixer that shows the active channel source on a display. This will help users to select the desired source for the desired area. Each in- and output has own individual VU metres which gives you total level information in one view. The channel gain must be set at the back to prevent wrong use by non-technical users. The displays are pre-programmed with 16 different source names which can be set at the backside by an installer. It has 2 microphone inputs with an easy-to-use reverb effect and talk-over function. At the front it has direct inputs for a microphone, a line input and a dedicated phone/mp3 input. With a pair of headphones you can monitor all out- and inputs.

Specifications

Inputs

Mono Inputs              2

Mono Input Connector                   3-pin XLR, TRS balanced 6.3 mm

Stereo Inputs                   7

Stereo Input Connector                  RCA

Auxiliary Inputs                   1

Auxiliary Input Connector                   RCA, TRS balanced 3.5 mm

Outputs

Main Outputs                    2

Main Output Connector                   3-pin XLR, RCA

Zone Outputs                  2

Zone Output Connector                        3-pin XLR, RCA

Monitor Outputs                     1

Monitor Output Connector                      RCA

Headphone Output                     1

Headphone Output Connector                     TS balanced 6.3 mm

Record Output                     1

Record Output Connector                   RCA

Digital Playback

Audio Interface USB Input                    2

Audio Interface Input Connection                   USB-B

Audio Interface USB Type                   2.0

Audio Interface Sample Rate                    48 kHz

Audio Interface Supported Input Channels                      4

Audio Specifications

THD Level                  < 0.05 %

Signal-to-noise Ratio                   > 100 dB

Signal-to-noise Ratio (Mic)                    > 100 dB

Signal-to-noise Ratio (Line)                     > 100 dB

AD/DA Convertor Sample Rate                     48 kHz

Frequency Response Minimum                     20 Hz

Frequency Response Maximum                      20000 Hz

Phantom Power                    No

Sound Editing

Parametric Channel Equalizer                    3 Bands

Input Channel Equalizer Gain Range                  12 dB

Input Channel Fixed Frequencies                     80, 1.000, 12.000 Hz

Microphone Input Equalizer Gain Range                           12 dB

Parametric Microphone Equalizer                    3 Bands

Microphone Input Fixed Frequencies                        120, 800, 5.000 Hz

Built-in FX                    Yes

FX Types                    Reverb

Software Specifications

Supported Operating Systems                Mac, Windows

Control and Programming

Display                7-segment

Product Properties

LED Indicators                Channel select, Clip, Output level, Signal

Electrical Specifications and Connections

Power Supply                   100-240 V AC 50/60 Hz

Power Consumption                   33 W

Fuse                   1 A

Power Connector In                   IEC

Data Connector In                     USB

Mechanical Specifications

Fader Length                  60 mm (2.362″)

Height (mm)                    256 mm (10.079″)

Width (mm)                    483 mm (19.016″)

Depth (mm)                      126 mm (4.961″)

Flightcase Size                     19"

Rack Units                         6 U

Housing                 Metal

Colour                  Black

Weight          6.4 kg (14.11 lb)

IP Rating                  IP20 (indoor use only)

Included Items

Included Cables              IEC cable, USB-A - USB-B cable