• Prevents ground loops, hum and buzz

• Low distortion

• Ground lift switch

• 0 and 20 dB attenuation switch

• Works with 9 V battery or 18-48 V phantom power

The DAP ADI-200 active DI box helps you with instruments with a low volume level and a high impedance output. It converts an instrument output to a stronger signal without adding any distortion, interference or noise.

With the ADI-200, for example, you can use long cables without any problems while retaining a clean and undistorted signal. It is therefore a reliable system for on-stage. It works on a 9 volt battery or via phantom power and is equipped with a ground lift function and a 20 dB attenuation switch.

Specifications

Inputs

Mono Inputs              1

Mono Input Connector                     3-pin XLR, TS unbalanced 6.3 mm

Mono Input Impedance                 250000 Ω

Outputs

Main Outputs                 1

Main Output Connector                   3-pin XLR, TS unbalanced 6.3 mm

Audio Specifications

THD Level                < 0.005 %

Signal-to-noise Ratio                 > 105 dB

Frequency Response Minimum                  10 Hz

Frequency Response Maximum                 40000 Hz

Phantom Power                   18 V, 24 V, 48 V

Sound Editing

Attenuation              -20dB

Battery

Battery Type               9 V block PP3

Battery Voltage                   9 V

Mechanical Specifications

Height (mm)               55 mm (2.165″)

Width (mm)                135 mm (5.315″)

Length (mm)                  145 mm (5.709″)

Housing                   Magnesium die-cast

Weight                 0.65 kg (1.433 lb)

IP Rating                 IP20 (indoor use only)

Colour                Black

Product Properties

LED Indicators               Power