• 4000 W / 141 dB SPL at 1 m

• 2x 18" Celestion Ferrite Magnet subwoofer with 5" voice coil

• Class D Amplifier

• Configurable DSP-optimised amplification

• Multi-voltage power supply with active PFC

The DAP Odin S-218A is an extra bold, heavy weight Ultra Subwoofer suitable for medium to big crowds. It produces an awesome wall of sound with a frequency response as low as 28 Hz for an extremely low bass. The internal high-power 4 kW Class D amplifier has a peak output power of 10,000 watts. The subwoofer is intended to be used in combination with T-8(A) Line Array Satellites for a super punchy full-range sound.

The Odin S-218A is equipped with two 18" Celestion Ferrite Magnet subwoofers containing 5" voice coils producing up to a staggering 141 dB SPL at 1 meter distance. The DSP settings are configurable to make sure that the S-218A delivers under any circumstance and in any setup.

Several DSP presets are available, including preset for “Cardioid” and “End Fire” mode. A great addition to the T-8(A) Satellite and S-18(A) Subwoofer to literally bring more punch and depth to your live shows.

With the Odin Active loudspeakers, the free Odin Editor software, in combination with the CL-4 Connect, allows you to freely adjust the EQ, gain and delay per speaker or per group of speakers from a Windows PC/laptop. It also allows you to monitor live information from each speaker, such as amplifier temperature and high/low output. In addition, EASE Focus 3 software can be used to calculate the splay angle and "Throw". A plug-in has been developed for adding our speakers to its database.

Please note that powerCON and network cables are not included but are to be ordered separately.

Specifications

Outputs

Low Driver Power   1600 W

Power Amplifier RMS Output    4000 W

Power Amplifier Peak Output    10000 W

Main Outputs    1

Main Output Connector     3-pin XLR

Inputs

Mono Inputs    1

Mono Input Connector    3-pin XLR

Audio Specifications

THD Level    < 0.5 %

Signal-to-noise Ratio    > 90 dB

AD/DA Convertor Sample Rate     48 kHz

Amp Technology    Class D

Damping Factor    200 :1

Speaker System    Subwoofer

Speaker Sensitivity (1 W/1 m)     101 dB

Speaker Impedance    8 Ω

Maximum SPL at 1 m     141 dB

DSP Processor Bitrate    32-bit

Frequency Response Minimum     28 Hz

Frequency Response Maximum    110 Hz

Frequency Response (-6 dB) Minimum    28 Hz

Frequency Response (-6 dB) Maximum    110 Hz

Crossover Frequency (Low)    25 Hz

Crossover Frequency (High)    90 Hz

Woofer Diameter    18 "

Woofer Voice Coil Diameter    5 "

Woofer Magnet Type    Ferrite

Subwoofer Dispersion Angle (Horizontal)     360 °

Subwoofer Dispersion Angle (Vertical)     180 °

Sound Editing

Equalizer Gain Range    30 dB

Parametric Output Equalizer    8 Bands

Crossover Filter Types     Butterworth

Crossover Slopes     24 dB

Phase Reverse     Yes

Internal Storage

User Presets     Yes

User Presets Capacity     10

Control and Programming

Control Mode    PC Software, Stand Alone

Electrical Specifications and Connections

Power Supply    100-240 V AC 50/60 Hz

Power Consumption    3100 W

Fuse    6.3 A

Power Connector In    powerCON Blue

Power Connector Out     powerCON Grey

Data Connector In     etherCON

Data Connector Out     etherCON

Mechanical Specifications

Amplifier Cooling    Axial fan

Height (mm)     665 mm (26.181″)

Width (mm)     1400 mm (55.118″)

Depth (mm)     635 mm (25″)

Material     Plywood

Material Thickness      18 mm (0.709″)

Colour    Black

Finish     Painted

Weight     115.5 kg (254.634 lb)

IP Rating      IP20 (indoor use only)

Product Properties

Pole Mount    M20

Electronic Protection      Convection-fan, Digital limiter, Overload, Thermal

LED Indicators     Clip, Data connect, Power, Protect, Signal

Speaker Grille Material     Steel

Speaker Handle Positions      Left side, Right side

Castors      Optional

Rigging

Rigging Options    Stacking

Included Items

Included Cables    None

Included Rigging     None