• 120 W RMS, max SPL of 113 dB at 1 m

• 60 - 20,000 Hz frequency range

• Dedicated mic and aux inputs

• Bluetooth 5.0 with True Wireless Stereo

• Internal DSP

The DAP NRG-12 Mobile is a full-range, battery-powered speaker with Bluetooth 5.0. It has a peak power output of 200 watts with 120 watts of continuous RMS power. With the separately available standard 12 V battery, the NRG-12 Mobile has a run time of approximately 20 hours at an average volume, more than enough to get through any occasion. The built-in amplifier has a 3-pin XLR/jack combo microphone input and a mini-jack auxiliary input that each have their own volume controls. There's also a separate volume control for the Bluetooth connection and the speaker offers True Wireless Stereo when connected to a second speaker. When it comes to DSP settings, the NRG-12 Mobile makes use of an EQ knob that crossfades between a flat setting, a contour setting and everything in between, providing customised control over the sound. LEDs on the back of the speaker show different statuses, including when the limiter kicks in and how much power the battery has left.

Specifications

Outputs

Power Amplifier RMS Output120 W

Power Amplifier Peak Output               200 W

Inputs

Mono Inputs            1

Mono Input Connector                  3-pin XLR

Auxiliary Inputs               1

Auxiliary Input Connector                   TS unbalanced 3.5 mm

Audio Specifications

THD Level                  < 0.5 %

Speaker Sensitivity (1 W/1 m)                  95 dB

Maximum SPL at 1 m             113 dB

Frequency Response Minimum              60 Hz

Frequency Response Maximum            20000 Hz

Woofer Diameter              12 "

Woofer Voice Coil Diameter               2 "

Woofer Magnet Type               Ferrite

Compression Driver Diameter             1 "

Compression Driver Voice Coil              1.4 "

Compression Driver Magnet Type               Ferrite

Dispersion Angle (Horizontal)             90 °

Dispersion Angle (Vertical)               60 °

Battery

Battery Type              Lead-Acid (not included)

Battery Voltage                12 V

Capacity             10 Ah

Runtime @Full                 8 h

Runtime Average             20 h

Charging Time               10 h

Electrical Specifications and Connections

Power Supply                100-240 V AC 50/60 Hz

Power Consumption                  120 W

Power Connector In               IEC

Mechanical Specifications

Height (mm)                 575 mm (22.638″)

Width (mm)             345 mm (13.583″)

Depth (mm)                360 mm (14.173″)

Material               Plywood

Weight                21 kg (46.297 lb)

IP Rating                IP20 (indoor use only)

Colour            Black

Product Properties

Retractable Handle      No