The DAP Splash 8A is an active 8-inch full-range on-the-road speaker with a maximum SPL of 113 dB at 1 meter. This speaker with built-in 240 watt amplifier can be used perfectly as a floor monitor or as a PA speaker for small locations. It has a versatile design and gives a clear sound. The Splash 8A is compact and has a narrow dispersion angle to minimize potential feedback and maximize its output.
The Splash series is designed to last and outperform. It has a sturdy ABS housing and has handles, a universal pole mount adapter and rubber feet for a quick and safe installation.
Specifications
Outputs
Low Driver Power 90 W
High Driver Power 30 W
Power Amplifier RMS Output 120 W
Power Amplifier Peak Output 240 W
Main Outputs 1
Main Output Connector 3-pin XLR
Inputs
Mono Inputs 1
Mono Input Connector 3-pin XLR
Audio Specifications
THD Level < 0.5 %
Signal-to-noise Ratio > 80 dB
Amp Technology Class D
Damping Factor 200 :1
Speaker System 2-way
Speaker Sensitivity (1 W/1 m) 92 dB
Maximum SPL at 1 m 113 dB
Frequency Response (-6 dB) Minimum 68 Hz
Frequency Response (-6 dB) Maximum 20000 Hz
Crossover Frequency (High) 2 Hz
Woofer Diameter 8 "
Woofer Voice Coil Diameter 1.5 "
Woofer Magnet Type Ferrite
Compression Driver Diameter 1 "
Compression Driver Voice Coil 1 "
Compression Driver Magnet Type Ferrite
Dispersion Angle (Horizontal) 90 °
Dispersion Angle (Vertical) 45 °
Electrical Specifications and Connections
Power Supply 100-240 V AC 50/60 Hz
Power Consumption 44 W
Fuse 0.8 A
Power Connector In IEC
Mechanical Specifications
Amplifier Cooling Convection
Height (mm) 420 mm (16.535″)
Width (mm) 270 mm (10.63″)
Depth (mm) 240 mm (9.449″)
Material ABS
Colour Black
Weight 5.53 kg (12.192 lb)
IP Rating IP20 (indoor use only)
Product Properties
Pole Mount 35 mm
Electronic Protection Clip limiter (fixed), DC voltage, Softstart, Thermal
