• 800 W / 129 dB SPL at 1 m

• 2x 8” Neodymium MID Woofers

• 2x 1” Celestion Neodymium compression drivers

• Waveguide for optimised low-mid frequency directivity

• Quick and easy setup (3-point suspension system)

The DAP Odin T-8 is a versatile 800-watt Passive Line Array Satellite Speaker, suitable for small to large crowds. It is stackable up to 4 units and can be flown to up to 12 units. The variety of stack and fly options allows you to set the correct sound dispersion for every application and location.

The Odin T-8 has two 8” Celestion Neodymium MID Woofers and two 1” Celestion Neodymium compression drivers, producing up to a staggering 129 dB SPL at 1 meter distance. It has an internal crossover frequency of 1800 Hz and can be bi-amped. A switch allows for a 3-dB boost of the high frequencies. It will work perfectly in combination with the S-18 passive subwoofer and the active S-18A subwoofer and S-218A ultra subwoofer. A specially designed waveguide and phase plug optimise the dispersion and frequency curve to ensure that the T-8 delivers under any circumstance and in any setup.

The hardware for flying the system allows for a single person to build and take down a full Odin Line Array set in no time. In addition, it is a very modular system, so you can place a DAP Odin Line-Array installation at any location. Several accessories are available for stacking, flying, or using a sub/top combination as a satellite setup. For example, consider the 35 mm pole mount adapter, stack frame and fly bar, where the vertical array angle of satellite speakers can be adjusted in 6 steps, from a 0° to 7.5° angle.

Specifications

Inputs

RMS Input Power                   800 W

Peak Input Power                 1200 W

Passive Input Connection             Speaker Connector 4 pole , Speaker Connector 4 pole Bi-amp mode

Outputs

Passive Output Connector               Speaker Connector 4 pole , Speaker Connector 4 pole Bi-amp mode

Audio Specifications

Speaker System                 2-way Line-Array

Speaker Sensitivity (1 W/1 m)                   97 dB

Speaker Impedance                  8 Ω

Maximum SPL at 1 m                129 dB

Frequency Response (-3 dB) Minimum                80 Hz

Frequency Response (-3 dB) Maximum               19000 Hz

Crossover Frequency (High)              1800 Hz

Woofer Diameter             8 "

Woofer Voice Coil Diameter               2 "

Woofer Magnet Type               Ferrite

Compression Driver Diameter               1 "

Compression Driver Voice Coil             1.75 "

Compression Driver Magnet Type         Neodymium

Dispersion Angle (Horizontal)              100 °

Dispersion Angle (Vertical)               10 °

Mechanical Specifications

Height (mm)                300 mm (11.811″)

Width (mm)              649 mm (25.551″)

Depth (mm)               465 mm (18.307″)

Material             Plywood

Weight               20.7 kg (45.636 lb)

IP Rating             IP20 (indoor use only)

Colour            Black

Speaker Adapter Diameter           35 mm (1.378″)

Product Properties

Rotatable Horn          No

Useable as Monitor/Wedge          No

Speaker Grille Material     Steel

Speaker Handle Positions     Back, Left side, Right side

Rigging

Mounting Options    3-point suspension

Rigging Options     Flying, Stacking

Thermal Specifications

Maximum Ambient Temperature     40 °C (104 °F)