• 10 antenna outputs for DAP EDGE series
  • Four antenna inputs for microphone receivers
  • DC-power and antenna signal distribution
  • Cascade function for connecting additional distributors
  • 19" brackets and DC power supply are included

The DAP EDGE ED-1 is a 4-way antenna distributor required in a setup with four or more wireless microphone receivers. A set of 2 unidirectional antennas, such as the DAP EDGE EUA-1, is necessary when using this antenna distributor. You can connect the receivers directly to the distributor through the BNC connectors on the backside. The Cascade BNC connectors allow you to loop the antenna signal through to a subsequent antenna distributor, allowing you to add another 4 receivers.


The EDGE ED-1 supplies power to your entire setup. Simply put the receivers in Phantom Power mode and the distributor will then power the receivers as well as the antennas. DC adapter and 19" brackets are included.


Specifications


Inputs

RF Antenna Inputs               2

RF Antenna Input Connection                BNC

RF Antenna Input Impedance                50 Ω


Outputs

RF Antenna Outputs                  10

RF Antenna Output Connection               BNC

RF Receiver Antenna Output Voltage                 15 V

RF Receiver Antenna Output Current                   600 mA


Wireless Specifications

Wireless Audio Frequency Start                 470 MHz

Wireless Audio Frequency End              980 MHz

Antenna Gain               10 dBi


Electrical Specifications and Connections

Power Supply            100-240 V AC 50/60 Hz

Output voltage                 12 V DC

Power Consumption               1 W

Power Connector In                  Low Voltage DC plug


Mechanical Specifications

Height (mm)             44.5 mm (1.752″)

Width (mm)                215 mm (8.465″)

Length (mm)                151 mm (5.945″)

Installation Depth (Excl. Connector)                151 mm (5.945″)

Flightcase Size                 19"

Rack Units                 1 U

Housing                 Metal

Colour                 Black

Weight                  1.02 kg (2.249 lb)


Product Properties

LED Indicators                Power


Thermal Specifications

Maximum Ambient Temperature              50 °C (122 °F)

Minimum Ambient Temperature                 -10 °C (14 °F)


Included Items

Included Cables                BNC cable, IEC cable

Included Accessories                 19'' Rack installation kit, Adapter, BNC Panel Mount, Screws

Write a review

Note: HTML is not translated!
    Bad           Good

DAP EDGE ED-1

  • Brand: DAP Audio
  • Product Code: D1485
  • Availability: Out Of Stock
  • £475.00

  • Ex Tax: £395.83

Related Products

DAP EDGE EHS-1

DAP EDGE EHS-1

UHF true-diversity receiver with full-colour LCDBand Scan function for interference eliminationHand-..

£465.00 Ex Tax: £387.50

DAP EDGE EUA-1

DAP EDGE EUA-1

2 antennas for EDGE-seriesPowered by antenna distributor or DAP EDGE receiverMicrophone stand mount ..

£210.00 Ex Tax: £175.00

DAP EDGE EBS-1

DAP EDGE EBS-1

UHF true-diversity receiver with full colour LCDBand Scan function for interference eliminationBelt-..

£435.00 Ex Tax: £362.50