• Compact (1U) and lightweight Class D touring amplifier
  • Lo-Z (2, 4, 8 ohms), Hi-Z (70 V), stereo and bridge modes
  • DSP with 512 FIR filter taps and 8-band parametric EQ
  • Full control via IP and Windows 10/11 software
  • Universal SMPS (100 - 250 V AC) with PFC

The DAP TA-4.1700 is a compact and lightweight 4-channel DSP power amplifier for touring applications. In a 1U rack space it delivers 4x 1700 W into 4 ohms, is capable of driving 2-ohm loads and can be used for 70 V systems and bridged for even more power. Designed for low impedance and high current, it achieves over 90% efficiency with excellent stability.


The DSP can be controlled via a network connection and free PC software (Windows 10/11) and offers input delays of up to 100 ms, output delays of up to 20 ms, +/- 18 dB level matching, 4x4 audio route mixing, 8-band parametric input equalisers, 8-band parametric output equalisers, high and low pass filters, FIR filters with up to 512 taps, peak and RMS limiters, phase control and more. The amplifier supports IP and output voltage/current, temperature and protection can be monitored over the network. It also has a built-in switch that allows the network to be daisy-chained to multiple amplifiers. The LCD screen shows status and settings, which can be adjusted using the rotary knob next to it.


The universal switching power supply uses active PFC and soft-switching technology, accepts input voltages from 100 - 250 V AC and is optimised for the audio power amplifier.


Specifications


Outputs

2 ohms Stable              Yes

Output per Channel into 8 ohms at 1 kHz                 1000 W

Output per Channel into 4 ohms at 1 kHz                1700 W

Output per Channel into 2 ohms at 1 kHz                 2900 W

Bridge Output into 8 ohms at 1 kHz              3400 W

Bridge Output into 4 ohms at 1 kHz                5800 W

Output per Channel at 70/100 V at 1 kHz               1700 W

Output Channels                4

Output Mode              4-channel, Bridge, Mono, Parallel, Stereo

Output Connector                   Speaker Connector 4 pole


Inputs

Mono Inputs               4

Transformer                 70 V

Mono Input Connector                3-pin XLR

Mono Input Gain Range              21 dB

Mono Input Impedance                2000 Ω


Audio Specifications

THD Level           < 0.05 %

Signal-to-noise Ratio             > 105 dB

Slew Rate                 50 V/μs

Amp Technology               Class D

Damping Factor              1000 :1

Crosstalk               90 dBu

Frequency Response Minimum              20 Hz

Frequency Response Maximum             20000 Hz


Software Specifications

Supported Operating Systems               Windows 10, Windows 11


Sound Editing

Parametric Input Equalizer              8 Bands

Parametric Output Equalizer             8 Bands

Input Equalizer Types            High Shelf, Low Shelf

Crossover Filter Types             Bessel, Butterworth, Linkwitz Riley

Crossover Slopes             6, 12, 24, 48 dB

Dynamics Processing             Limiter

Phase Reverse            Yes

Limiter Attack Time Minimum            1 ms

Limiter Attack Time Maximum                 2000 ms

Limiter Release Time Minimum               20 ms

Limiter Release Time Maximum             1000 ms

Output Delay (Max.)                30 ms

Input Delay (Max.)               100 ms


Internal Storage

User Presets             Yes

User Presets Capacity                  40


Control and Programming

Control Mode               PC Software

Display                LCD

Display Size              3 "


Electrical Specifications and Connections

Power Supply               100-240 V AC 50/60 Hz

SMPS                Yes

Power Consumption               1650 W

Power Connector In               Schuko Plug

Data Connector In              RJ45


Mechanical Specifications

Amplifier Airflow               Front to back

Amplifier Cooling               Axial fan

Height (mm)                 45 mm (1.772″)

Width (mm)              483 mm (19.016″)

Installation Depth (Excl. Connector)                375 mm (14.764″)

Flightcase Size                 19"

Rack Units               1 U

Housing             Steel

Colour               Black

Finish              Powder Coating

Weight              10.1 kg (22.267 lb)

IP Rating                 IP20 (indoor use only)


Product Properties

Electronic Protection           Clip limiter, DC voltage, Overheat, Overload, Under voltage


Thermal Specifications

Maximum Ambient Temperature             40 °C (104 °F)

Minimum Ambient Temperature             -15 °C (5 °F)

Maximum Surface Temperature               70 °C (158 °F)


Included Items

Included Cables             Fixed Cable

Write a review

Note: HTML is not translated!
    Bad           Good

DAP TA-4.1700

  • Brand: DAP Audio
  • Product Code: D4223
  • Availability: 5-7 Days
  • £1,540.00

  • Ex Tax: £1,283.33