Configurable built-in crossover for top-sub combination
Class D amp, SMPT and Soft Start technology
Advanced protection circuits and indicator LEDs
Stereo and bridge mode
1U suitable for 19" rack
The DAP CA-4150 is a 4x 150 watt amplifier with configurable built-in Crossover. Equipped with Class D technology and SMPS, the CA-4150 has all the necessary functionalities for today's user.
This 4-channel model has terminal inputs and outputs with the option to switch between stereo and bridge mode. In addition, the gain is adjustable per channel.
When a channel signal is causing distortion, a LED signal is indicating you to decrease the source signal level. It is not only protected from clipping, but also from overloading and overheating due to soft start technology. The CA-4150 can be built into a 19-inch rack case and has a 1 unit height.
Specifications
Outputs
2 ohms Stable Yes
Output per Channel into 8 ohms at 1 kHz 90 W
Output per Channel into 4 ohms at 1 kHz 150 W
Output per Channel into 2 ohms at 1 kHz 230 W
Bridge Output into 8 ohms at 1 kHz 190 W
Bridge Output into 4 ohms at 1 kHz 275 W
Output per Channel into 8 ohms from 20 Hz - 20 kHz 90 W
Output per Channel into 4 ohms from 20 Hz - 20 kHz 150 W
Output per Channel into 2 ohms from 20 Hz - 20 kHz 230 W
Bridge Output 8 ohms from 20 Hz - 20 kHz 190 W
Bridge Output 4 ohms from 20 Hz - 20 kHz 275 W
Output Channels 4
Output Gain 28 dB
Output Mode 4-channel, Bridge, Stereo
Output Connector Terminal
Inputs
Mono Inputs 4
Mono Input Connector Terminal
Mono Input Impedance 20000 Ω
Unbalanced Mono Input Sensitivity 1 dBv
Audio Specifications
THD Level < 0.1%
Signal-to-noise Ratio > 96 dB
Slew Rate 15 V/μs
Amp Technology Class D
Damping Factor 180 :1
Crosstalk 70 dBu
Frequency Response Minimum 20 Hz
Frequency Response Maximum 20000 Hz
Sound Editing
Crossover Filter Types Built-in Crossover
Electrical Specifications and Connections
Power Supply 220-240 V AC 50 Hz
SMPS Yes
Power Consumption 636 W
Fuse 4 A
Power Connector In IEC
Mechanical Specifications
Amplifier Airflow Front to back
Amplifier Cooling Radial Fan
Height (mm) 44 mm (1.732″)
Width (mm) 484 mm (19.055″)
Length (mm) 281 mm (11.063″)
Installation Depth (Excl. Connector) 281 mm (11.063″)
Flightcase Size 19"
Rack Units 1 U
Housing Metal
Colour Black
Finish Powder Coating
Weight 4.85 kg (10.692 lb)
IP Rating IP20 (indoor use only)
Product Properties
Handles No
Electronic Protection Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart, Thermal
