The DAP Compact 9.2 1U installation mixer is built to combine maximum audio possibilities and needs for a pub, school, or public area without scarifying on the ease of use. The user can adjust 3 microphone levels and 2 line levels. Both line levels have 6 selectable input sources which are shown on a clear display. On each line input it is possible to select a pre-programmed label which is shown on the display, so there is no need to do difficult programming. This will help users to select the desired source for the desired area, because the Compact 9.2 also has 2 individual zones.
All gain, EQ, phantom power and technical settings are on the backside. Once the installer has set everything correctly the user doesn’t need to worry about difficult settings, only volume and source select are available on the front panel. The front panel also has a special input if you like to connect a device instantly. This input can be switched between line and phone mode. The phone mode adjusts the input sensitivity into the correct value for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. The Compact 9.2 is the perfect solution for situations where non-technical users need to operate professional audio systems.
Specifications
Inputs
Mono Inputs 3
Mono Input Connector 3-pin XLR, TRS balanced 6.3 mm
Stereo Inputs 7
Stereo Input Connector RCA/TRS unbalanced 3.5 mm
Outputs
Main Outputs 2
Main Output Connector 3-pin XLR
Audio Specifications
THD Level < 0.01 %
Signal-to-noise Ratio > 100 dB
Frequency Response Minimum 20 Hz
Frequency Response Maximum 20000 Hz
Sound Editing
Graphic Main Equalizer 3 Bands
Main Output Equalizer Gain Range 6 dB
Main Output Fixed Frequencies 80, 2.500, 12.000 Hz
Parametric Zone Equalizer 3 Bands
Zone Output Equalizer Gain Range 6 dB
Zone Output Fixed Frequencies 80, 2.500, 12.000 Hz
Control and Programming
Display LCD
Product Properties
LED Indicators Channel select, Clip, Output level, Signal