• Wide range input voltage

• 2x 960 pixel outputs

• Remote setup interface

• Art-Net, sACN and DMX512 control

• DIN EN43880 form factor

The Showtec SPI-2 Install is a compact SPI controller for your digital LED strips. The DIN-rail housing is ideal for fixed-installation purposes. All connections are easy connectable with plug-in Phoenix terminals. Simply use DMX, Art-Net or sACN for controlling most common types of LEDs (WS2811, WS2812B, PSK6812, P943, UCS9812). All settings can be done by the easy-to-use menu on the graphic display and buttons on the front or via the remote web interface, which can be accessed within the network. Each group output can handle up to 960 pixels. The DIN-rail-mounted SPI-2 converts DMX, Art-Net, or sACN to SPI and is ideal for network system integration projects.

Specifications

Control and Programming
Control Mode    Art-Net, DMX, TCP IPv4
DMX Channels    512
sACN    Yes

Electrical Specifications and Connections
Power Supply     5-36 V DC
Output voltage   5-36 V DC
Power Consumption   6 W
Power Connector In    Phoenix
DMX Connector In    Phoenix
DMX Connector Out   Phoenix
Data Connector In   RJ45

Mechanical Specifications
Length (mm)   106 mm (4.173″)
Width (mm)   87 mm (3.425″)
Height (mm)  58 mm (2.284″)
Weight   0.185 kg (0.408 lb)
IP Rating   IP20 (indoor use only)
Housing   Plastic
Colour   Gray

Product Properties
LED Indicators   Data connect, Power, Signal
DIN Rail Spacing  35 mm (1.378″)

Thermal Specifications
Maximum Ambient Temperature   40 °C (104 °F)