• DMX/RDM splitter for 8 outputs

• DMX Indication LEDs on in-& outputs

• 3P XLR outputs

• Supports Remote Device Management (RDM) Protocol

The DB models from Showtec are universal DMX512 splitters. They are designed to distribute the incoming DMX signal, in daisy chain configurations, into multiple separate outputs with an additional “Through” port. They can be mounted in any 19” rack or into the truss by the M10 nut on the rear end of the unit. It has clear LEDs to show the DMX signal status of each output and input. There are four models available, DB-1-4 with or without RDM which has 4 outputs and 3 & 5-pin XLR connectors, and the DB-1-8 with or without RDM which has 8 outputs with 3P XLR connectors.

Specifications

Control and Programming
Control Mode   DMX
Protocols   DMX, RDM
Universes   1

Electrical Specifications and Connections
Power Supply   100-240 V AC 50/60 Hz
Power Consumption   5 W
Power Connector In   Schuko Plug
DMX Connector   XLR 3P In/Out, XLR 5P In/Out
DMX Connector In   XLR 3P, XLR 5P
DMX Connector Out   XLR 3P, XLR 5P

Mechanical Specifications
Length (mm)   483 mm (19.016″)
Width (mm)   134 mm (5.276″)
Height (mm)  46 mm (1.811″)
Weight   1.96 kg (4.321 lb)
Rack Units   1 U
IP Rating   IP20 (indoor use only)
Housing   Metal, Plastic
Colour   Gray

Product Properties
LED Indicators   Power, Signal

Thermal Specifications
Maximum Ambient Temperature  40 °C (104 °F)

Included Items
Included Cables   IEC cable