• 800 W RMS / 129 dB SPL at 1 m

• 15" Ferrite Celestion low driver

• 1,75" Ferrite Celestion compression driver

• Class D amplifier with integrated DSP processor

• Usable as stage monitor, full-range speaker & top speaker

The DAP Odin SF-15A is a versatile 15" full-range active bi-amped speaker. Its Celestion Ferrite drivers provide a well balanced sound suitable for both on and off stage. Due to its sturdy, road-ready and extra angular design, it can be used as stage monitor, full-range speaker as well as top speaker. A combination is possible with a DAP Odin S-18 or S-18A Subwoofer. The low driver has a water resistant coating to survive humid and outdoor conditions.

The SF-15A is equipped with an 800 watt RMS Class D amplifier. It can produce a staggering 129 dB SPL at 1 meter distance. This makes it more than competent for either in-fill, out-fill and drum-fill applications as well as delay speaker. It also has an integrated DSP processor that is similar to other active Odin speakers and can be used with the same editor software.

The SF series includes all mounting/rigging options, both for flying (built-in M10 thread) and in combination with a speaker stand or distance pole. The rotatable horn enables the speaker to be placed both in horizontal and vertical position.

Specifications

Outputs

Low Driver Power    350 W

High Driver Power     130 W

Power Amplifier RMS Output     800 W

Power Amplifier Peak Output     3200 W

Main Outputs    1

Main Output Connector    3-pin XLR

Inputs

Mono Inputs    1

Mono Input Connector     3-pin XLR

Audio Specifications

THD Level    < 0.5 %

Signal-to-noise Ratio    > 90 dB

AD/DA Convertor Sample Rate    48 kHz

Amp Technology    Class D

Damping Factor    200 :1

Speaker System    2-way

Speaker Sensitivity (1 W/1 m)     99 dB

Maximum SPL at 1 m     129 dB

DSP Processor Bitrate     32-bit

Frequency Response (-3 dB) Minimum     50 Hz

Frequency Response (-3 dB) Maximum     19000 Hz

Crossover Frequency (High)     1600 Hz

Woofer Diameter     15 "

Woofer Voice Coil Diameter    3 "

Woofer Magnet Type     Ferrite

Compression Driver Diameter     1 "

Compression Driver Voice Coil     1.75 "

Compression Driver Magnet Type    Ferrite

Dispersion Angle (Horizontal)     80 °

Dispersion Angle (Vertical)     60 °

Sound Editing

Equalizer Gain Range    30 dB

Parametric Output Equalizer     8 Bands

Phase Reverse      Yes

Internal Storage

User Presets     Yes

User Presets Capacity    10

Control and Programming

Control Mode     PC Software, Stand Alone

Electrical Specifications and Connections

Power Supply     100-240 V AC 50/60 Hz

Power Consumption      320 W

Fuse     6.3 A

Power Connector In     powerCON Blue

Power Connector Out     powerCON Grey

Data Connector In     etherCON

Data Connector Out    etherCON

Mechanical Specifications

Amplifier Cooling     Axial fan

Height (mm)     711 mm (27.992″)

Width (mm)    439 mm (17.283″)

Depth (mm)      395 mm (15.551″)

Material      Plywood

Material Thickness   15 mm (0.591″)

Colour    Black

Finish    Painted

Weight     28 kg (61.729 lb)

IP Rating       IP20 (indoor use only)

Product Properties

Pole Mount    35 mm

Electronic Protection     Convection-fan, Digital limiter, Overload, Thermal

LED Indicators     Clip, Data connect, Power, Protect, Signal

Rotatable Horn     Yes

Useable as Monitor/Wedge     Yes

Speaker Grille Material     Steel

Speaker Handle Positions      Left side, Right side

Rigging

Mounting Options    Eyelets

Mounting Orientations    Horizontal, Vertical

Rigging Options    Flying

Rigging Eye Thread     M10

Thermal Specifications

Maximum Ambient Temperature     40 °C (104 °F)

Included Items

Included Cables   None

Included Accessories    None

Included Rigging     None