• 800 W / 129 dB SPL at 1 m

• 2x 8" Neodymium MID Woofers

• 2x 1" Celestion Neodymium compression drivers

• Waveguide for optimised low-mid frequency directivity

• Quick and easy setup (3-point suspension system)

The DAP Odin T-8A is a versatile 800-watt Bi-Amp Line Array Satellite Speaker, suitable for small to large crowds. They are stackable up to 4 units and hangable to up to 12 units. The variety of options allows you to set the correct sound dispersion and DSP settings according to the application and location.

The Odin T-8A is equipped with two 8" Celestion Neodymium MID Woofers and two 1" Celestion Neodymium compression drivers, producing up to a staggering 129 dB SPL at 1 meter distance. It will work perfectly in combination with any Odin subwoofer. A specially designed waveguide, phase plug, and configurable DSP-optimised amplification make sure that the T-8A delivers under any circumstance and in any setup.

The handy hanging system allows you to build up and break down a complete Odin Line Array set in no time and on your own. In addition, it is a very modular system, so you can place a DAP Odin Line-Array installation at any location. Various accessories are available for stacking, hanging or using a sub/top combination as a satellite setup. For example, consider the 35 mm pole mount adapter, stack frame and fly bar, where the vertical array angle of satellite speakers can be adjusted in 6 steps, from a 0° to 7.5° spread angle.

The free Odin Editor software in combination with the CL-4 Connect, allows you to freely adjust the EQ, gain and delay per speaker or per group of speakers from a Windows PC/laptop. It also allows you to monitor live information from each speaker, such as amplifier temperature and high/low output. In addition, EASE Focus 3 software can be used to calculate the splay angle and "Throw". A plug-in has been developed for adding our speakers to its database.

Please be aware that powerCON and network cables are not included.

Specifications

Outputs

Low Driver Power    650 W

High Driver Power    150 W

Power Amplifier RMS Output    800 W

Power Amplifier Peak Output    3200 W

Main Outputs    1

Main Output Connector    3-pin XLR

Inputs

Mono Inputs   1

Mono Input Connector    3-pin XLR

Audio Specifications

THD Level    < 0.5 %

Signal-to-noise Ratio    > 90 dB

AD/DA Convertor Sample Rate      48 kHz

Amp Technology    Class AB & D

Damping Factor    200 :1

Speaker System    2-way Line-Array

Speaker Sensitivity (1 W/1 m)     97 dB

Maximum SPL at 1 m    129 dB

DSP Processor Bitrate    32-bit

Frequency Response (-3 dB) Minimum     80 Hz

Frequency Response (-3 dB) Maximum    19000 Hz

Crossover Frequency (Low)    90 Hz

Crossover Frequency (High)    1600 Hz

Woofer Diameter    8 "

Woofer Voice Coil Diameter     2 "

Woofer Magnet Type   Neodymium

Compression Driver Diameter    1 "

Compression Driver Voice Coil    1.75 "

Compression Driver Magnet Type    Neodymium

Dispersion Angle (Horizontal)    100 °

Dispersion Angle (Vertical)    10 °

Sound Editing

Equalizer Gain Range   30 dB

Parametric Output Equalizer    8 Bands

Crossover Filter Types    Butterworth

Crossover Slopes    24 dB

Phase Reverse    Yes

Internal Storage

User Presets   Yes

User Presets Capacity    10

Control and Programming

Control Mode    PC Software, Stand Alone

Electrical Specifications and Connections

Power Supply    100-240 V AC 50/60 Hz

Power Consumption     300 W

Fuse     5 A

Power Connector In     powerCON Blue

Power Connector Out     powerCON Grey

Data Connector In     etherCON

Data Connector Out     etherCON

Mechanical Specifications

Amplifier Cooling    Axial fan

Height (mm)     300 mm (11.811″)

Width (mm)     635 mm (25″)

Depth (mm)     468 mm (18.425″)

Material     Plywood

Material Thickness     18 mm (0.709″)

Colour     Black

Finish     Painted

Weight     22.5 kg (49.604 lb)

IP Rating     IP20 (indoor use only)

Product Properties

Pole Mount    Optional 35 mm pole mount

Electronic Protection      Convection-fan, Digital limiter, Overload, Thermal

LED Indicators     Clip, Data connect, Power, Protect, Signal

Rotatable Horn     No

Useable as Monitor/Wedge    No

Speaker Grille Material      Steel

Speaker Handle Positions    Left side, Right side

Rigging

Mounting Options    3-point suspension

Rigging Options    Flying, Stacking

Included Items

Included Cables     None

Included Rigging     None