• 150 W RMS, max SPL of 115 dB at 1 m

• Speaker sensitivity 94 dB/W at 1 m

• Full range (70 - 20,000 Hz)

• Dual-angle speaker flange (0° and 5°)

• Lightweight (12.5 kg)

The DAP NRG-10 is a passive full-range loudspeaker rated at 550 watts peak (150 watts continuous RMS). It uses a 10” woofer and a 1” compression driver. With a sensitivity of 94 dB/W/m, the NRG-10 comfortably plays up to 115 dB with peaks of up to 127 dB. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The woofer has a low cut-off point of 70 Hertz (-6 dB).

The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. It uses 4-pole speaker in and thru connectors and offers an additional 4-pin terminal connector, which is especially useful for permanent installation applications. To get the most out of the NRG-10, we recommend using a 4th order high-pass filter at 50 Hertz and adding an NRG series subwoofer.

Specifications

Inputs

RMS Input Power      150 W

Peak Input Power       550 W

Passive Input Connection       Speaker Connector 4 pole , Terminal

Outputs

Passive Output Connector       Speaker Connector 4 pole

Audio Specifications

Speaker System      2-way

Speaker Sensitivity (1 W/1 m)      94 dB

Speaker Impedance      8 Ω

Maximum SPL at 1 m      115 dB

Frequency Response (-6 dB) Minimum      70 Hz

Frequency Response (-6 dB) Maximum      20000 Hz

Woofer Diameter      10 "

Woofer Voice Coil Diameter      2 "

Woofer Magnet Type     Ferrite

Compression Driver Diameter       1 "

Compression Driver Voice Coil       1.4 "

Compression Driver Magnet Type      Ferrite

Dispersion Angle (Horizontal)      90 °

Dispersion Angle (Vertical)       60 °

Mechanical Specifications

Height (mm)      550 mm (21.654″)

Width (mm)      322 mm (12.677″)

Depth (mm)       320 mm (12.598″)

Material        Plywood

Weight        12.5 kg (27.558 lb)

IP Rating        IP20 (indoor use only)

Colour       Black

Finish       Painted

Speaker Adapter Diameter      35 mm (1.378″)

Product Properties

Useable as Monitor/Wedge     No

Speaker Grille Material        Steel

Speaker Handle Positions        Left side, Right side

Rigging

Rigging Eye Thread    M10

Thermal Specifications

Maximum Ambient Temperature      40 °C (104 °F)