• 150 W RMS, max SPL of 118 dB at 1 m

• Speaker sensitivity 96 dB/W at 1 m

• Full range (50 - 20,000 Hz)

• Dual-angle speaker flange (0° and 5°)

• Lightweight (20.2 kg)

The DAP NRG-15 is a passive full-range loudspeaker rated at 550 watts peak (150 watts continuous RMS). It uses a 15” woofer and a 1” compression driver. With a sensitivity of 96 dB/W/m, the NRG-15 comfortably plays up to 118 dB with peaks of up to 130 dB. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The woofer has a low cut-off point of 50 Hertz (-6 dB).

The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. It uses 4-pole speaker in and thru connectors and offers an additional 4-pin terminal connector, which is especially useful for permanent installation applications. To get the most out of the NRG-15, we recommend using a 4th order high-pass filter at 50 Hertz and adding an NRG series subwoofer.

Specifications

Inputs

RMS Input Power     150 W

Peak Input Power       550 W

Passive Input Connection      Speaker Connector 4 pole , Terminal

Outputs

Passive Output Connector     Speaker Connector 4 pole

Audio Specifications

Speaker System      2-way

Speaker Sensitivity (1 W/1 m)       96 dB

Speaker Impedance       8 Ω

Maximum SPL at 1 m       118 dB

Frequency Response (-6 dB) Minimum      50 Hz

Frequency Response (-6 dB) Maximum       20000 Hz

Woofer Diameter      15 "

Woofer Voice Coil Diameter      2 "

Woofer Magnet Type      Ferrite

Compression Driver Diameter       1 "

Compression Driver Voice Coil      1.4 "

Compression Driver Magnet Type      Ferrite

Dispersion Angle (Horizontal)      90 °

Dispersion Angle (Vertical)      60 °

Mechanical Specifications

Height (mm)      680 mm (26.772″)

Width (mm)      440 mm (17.323″)

Depth (mm)       460 mm (18.11″)

Material      Plywood

Weight      20.2 kg (44.533 lb)

IP Rating      IP20 (indoor use only)

Colour     Black

Finish      Painted

Speaker Adapter Diameter      35 mm (1.378″)

Product Properties

Useable as Monitor/Wedge      No

Speaker Grille Material     Steel

Speaker Handle Positions      Left side, Right side

Rigging

Rigging Eye Thread     M10

Thermal Specifications

Maximum Ambient Temperature      40 °C (104 °F)