The DAP CA-2150 is a 2x 150 watt amplifier for a compact 19-inch installation with a 1 unit height. Equipped with Class D technology and SMPS, the CA-2150 has all the necessary functionalities for today's user.
This 2-channel model has XLR and Jack inputs. Available outputs are speakON and 6.3 mm Jack with the option to switch between stereo and bridge mode. In addition, the gain is adjustable per channel.
When a channel signal is causing distortion, a LED signal is indicating you to decrease the source signal level. It is not only protected from clipping, but also from overloading and overheating due to soft start technology.
Specifications
Outputs
2 ohms Stable Yes
Output per Channel into 8 ohms at 1 kHz 90 W
Output per Channel into 4 ohms at 1 kHz 150 W
Output per Channel into 2 ohms at 1 kHz 230 W
Bridge Output into 8 ohms at 1 kHz 190 W
Bridge Output into 4 ohms at 1 kHz 275 W
Output per Channel into 8 ohms from 20 Hz - 20 kHz 90 W
Output per Channel into 4 ohms from 20 Hz - 20 kHz 150 W
Output per Channel into 2 ohms from 20 Hz - 20 kHz 230 W
Bridge Output 8 ohms from 20 Hz - 20 kHz 190 W
Bridge Output 4 ohms from 20 Hz - 20 kHz 275 W
Output Channels 2
Output Gain 28 dB
Output Mode Bridge, Stereo
Output Connector Speaker Connector 4 pole , TS unbalanced 6.3 mm
Inputs
Mono Inputs 2
Mono Input Connector 3-pin XLR, TRS balanced 6.3 mm
Mono Input Impedance 20000 Ω
Unbalanced Mono Input Sensitivity 1 dBv
Audio Specifications
THD Level < 0.1%
Signal-to-noise Ratio > 96 dB
Slew Rate 15 V/μs
Amp Technology Class D
Damping Factor 180 :1
Crosstalk 70 dBu
Frequency Response Minimum 20 Hz
Frequency Response Maximum 20000 Hz
Sound Editing
Dynamics Processing Limiter
Electrical Specifications and Connections
Power Supply 220-240 V AC 50 Hz
SMPS Yes
Power Consumption 425 W
Fuse 4 A
Power Connector In IEC
Mechanical Specifications
Amplifier Airflow Front to side
Amplifier Cooling Axial fan
Height (mm) 44 mm (1.732″)
Width (mm) 484 mm (19.055″)
Length (mm) 281 mm (11.063″)
Installation Depth (Excl. Connector) 281 mm (11.063″)
Flightcase Size 19"
Rack Units 1 U
Housing Metal
Colour Black
Finish Powder Coating
Weight 3.7 kg (8.157 lb)
IP Rating IP20 (indoor use only)
Product Properties
Handles No
Electronic Protection Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart
