• Delivers the performance of a 750 W Tungsten Halogen unit

• 260 W Lumiled 7 colour LED engine using custom designed array

• Consistent CRI > 96

• LED Colour Linearity Compensation

• LED Colour Temperature Drift Compensation (on all LEDs)

Being able to produce perfectly calibrated colours by using a 7 colour Lumiled LED engine is the big advantage of the TS-260C7 Profile engine. Infinity combined 64 of the most used theatrical colours into a built-in virtual stroller. Add to this a CRI value which is consistently higher than 96 over the entire CCT range and the TS-260C7 becomes a formidable addition to any application where different moods in a high quality of light are needed. Equipped with 7 different DMX modes finding the right operation modus is no issue.

Specifications

Source

Light Source Type           LED

Light Source Quantity              7

Light Source Power            260 W

LED Colour Type   RGBCALDB

Life Expectancy                30000 h

Refresh Rate (Max.)              1 kHz

Luminous Flux (Total)              4500 lm

CRI                96

Minimum CCT             2000 K

Maximum CCT              8000 K

Control and Programming

Control Mode            DMX, Manual

DMX Channels        1, 5, 6, 10, 20

Protocols                DMX, RDM

Display               LCD

Fan mode               Yes

Dim Curve              Linear, Square, S-Curve

Dimmer Resolution                 16 bit

CMY & CTO Resolution                 8 bit

Dynamic Effects

Dimmer             0-100 %

Strobe              0-20 Hz

Colour System             Colour Wheel CMY+CTO

Electrical Specifications and Connections

Power Supply                 100-240 V AC 50/60 Hz

Power Consumption               260 W

Power Connector In                powerCON Blue

Power Connector Out               powerCON Grey

DMX Connector              XLR 3P In/Out, XLR 5P In/Out

DMX Connector In          XLR 3P, XLR 5P

DMX Connector Out            XLR 3P, XLR 5P

Mechanical Specifications

Length (mm)                468 mm (18.425″)

Width (mm)             323 mm (12.717″)

Height (mm)             457 mm (17.992″)

Weight               8.5 kg (18.739 lb)

IP Rating             IP20 (indoor use only)

Housing            Aluminium

Colour             Black

Product Properties

Cooling          Axial fan

Thermal Specifications

Maximum Ambient Temperature         40 °C (104 °F)

Maximum Surface Temperature            45 °C (113 °F)

Minimum Operating Temperature          -10 °C (14 °F)

Included Items

Included Cables          powerCON cable

Included Accessories           Gobo Holder